扭剪扳手套筒是不可以裝在普通電動扳手上面的，因?yàn)闄C(jī)器的設計原理不同，內制裝制不同，所以沒法使用
Torsional shear wrench socket can't be installed on ordinary electric wrench, because the design principle of the machine is different, and the internal system is different, so it can't be used
扭剪扳手套筒是由內外套筒兩部分組成的，正好卡在扭剪扳手相對應的前殼體上，如果放在普通扳手上是同法安裝的
The torsional shear wrench socket is composed of inner and outer sleeves, which are just clamped on the corresponding front housing of the torsional shear wrench. If it is placed on an ordinary wrench, it is installed in the same way
扭剪扳手是扭剪螺栓專用扳手，根據扭剪螺栓的特質所定做的扳手，扭剪螺栓終擰建議使用扭剪扳手才行，初擰可以使用定扭矩扳手或沖擊扳手進行初步擰緊
The torsion shear wrench is a special wrench for torsion shear bolts. It is customized according to the characteristics of the torsion shear bolts. The final tightening of the torsion shear bolts must use the torsion shear wrench, and the initial tightening can use the constant torque wrench or impact wrench for preliminary tightening
The above is a detailed introduction of the torsion shear electric wrench for you. I hope it can help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.lvhe888.com
