油壓脈沖扳手用于有高精度要求的作業：
Oil pressure pulse wrench is used for operations with high precision requirements:
如汽車摩托車電動車自行車等組裝裝配作業和維修保養；
Such as automobile, motorcycle, electric bicycle and other assembly operations and maintenance;
馬達引擎電機發電機空壓機小型機械電子電器家電木器家具等產品的組裝裝配作業和維修保養。
Assembly and maintenance of motor engine motor generator air compressor, small machinery, electronics, electrical appliances, home appliances, wood furniture and other products.
油壓脈沖定扭扳手，工業裝配專用
Oil pressure pulse constant torque wrench, special for industrial assembly
油壓脈沖定扭扳手
Oil pressure pulse constant torque wrench
震動低，噪音小
Low vibration and noise
油壓脈沖，自動斷氣
Oil pressure pulse, automatic gas cut-off
零件損耗少，使用壽命長
Less parts loss and long service life
工具有扭力調節孔，通過油壓的流量大小，控制扭矩輸出的大小，從而做到有效的控制扭矩。
The tool has a torque adjusting hole to control the torque output through the flow of oil pressure, so as to effectively control the torque.
細孔鏤空，內置靜音設置的排氣孔，大大減小了噪音污染。
The fine hole is hollowed out, and the built-in mute exhaust hole greatly reduces the noise pollution.
油壓脈沖定扭扳手與氣動扳手
Oil pressure pulse constant torque wrench and pneumatic wrench
油壓脈沖扳手：利用油流量的大小，控制扭矩輸出的大小。到達預設扭矩值時，油壓缸會持續脈沖動作但不會增加扭矩輸出，從而做到有效的控制扭矩。準確度高。
Oil pressure pulse wrench: use the oil flow to control the torque output. When the preset torque value is reached, the hydraulic cylinder will continue pulse action, but will not increase the torque output, so as to effectively control the torque. High accuracy.
氣動扳手：利用空氣壓力的大小來調整扭矩。當螺絲擰緊時，工具仍持續動作，容易導致主件變形及損壞，準確度不高。
Pneumatic wrench: use the air pressure to adjust the torque. When the screw is tightened, the tool still acts continuously, which is easy to cause deformation and damage to the main part, and the accuracy is not high.
重量轉速噪音：
Weight speed noise:
油壓脈沖扳手：重量輕，轉速低，噪音低
Oil pressure pulse wrench: light weight, low speed and low noise
氣動扳手：重量重，轉速高，噪音高。
Pneumatic wrench: heavy weight, high speed and high noise.
