電動扭剪扳手顧名思義就是扭剪梅花頭螺栓擰緊作業的工具，幫助您裝、拆螺拴、螺母，同時能比較準確地控制擰緊扭矩。利用螺栓定扭矩，當扳手達到一定扭矩時即可剪斷螺栓的梅花頭部分，其扭矩精度和軸向拉力是靠螺栓的定扭矩V型切口來保證的。拆裝扭力矩大、比手工更保險可靠。方便、美觀、實用、便于隨車攜帶。廣泛用于鋼結構橋梁、廠房、發電設備等設施的施工作業。
As the name implies, the electric torque wrench is a tool for torshear torx head bolt tightening operation, which can help you install and remove bolts and nuts, and control the tightening torque more accurately. The fixed torque of the bolt is used. When the wrench reaches a certain torque, the box head of the bolt can be cut off. The torque accuracy and axial tension are guaranteed by the fixed torque V-notch of the bolt. The disassembly torque is large, more reliable than manual. Convenient, beautiful, practical and easy to carry with the vehicle. It is widely used in the construction of steel structure bridges, plants, power generation equipment and other facilities.
電動扳手的特點：（1）使用壽命長（2）手柄和機殼材料散熱性好（3）功率大（4）耐撞擊性強（5）手使用性?xún)r(jià)比高
Features of electric wrench: (1) long service life (2) good heat dissipation of handle and housing materials (3) high power (4) strong impact resistance (5) high cost performance
電動扭剪扳手是一種終緊扭剪型高強度螺栓的工具，一般有電動扭剪扳手和手動扭剪扳手，其中電動扭剪扳手比較常見。
Electric shear wrench is a tool for final tightening of high-strength bolts of shear type, which generally includes electric shear wrench and manual shear wrench, among which electric shear wrench is more common.
扭剪扳手的應用： 扭剪型高強螺栓的初緊可使用沖擊電動扳手或定扭矩扳手,而終緊一定要使用扭剪扳手，所以扭剪扳手是專門終緊扭剪型高強螺栓的。
Application of shear wrench: impact electric wrench or constant torque wrench can be used for initial tightening of shear type high-strength bolts, while shear wrench must be used for final tightening, so shear wrench is specially used for final tightening of shear type high-strength bolts.
扭剪扳手的使用： 扭剪扳手主要是終緊扭剪型高強螺栓的，它的目的就是把扭剪型高強螺栓的梅花頭打斷即可。工作時將扳手頭對準螺栓頭，扣動開關即可開始工作，幾秒后，螺栓梅花頭將被扭斷，然后抽出扳手扣動扳機將梅花頭彈出，即結束工作。
Use of the shear wrench: The shear wrench is mainly used to tighten the shear type high-strength bolt. Its purpose is to break the torx head of the shear type high-strength bolt. When working, align the wrench head with the bolt head, and pull the switch to start working. After a few seconds, the bolt box head will be broken, and then pull out the wrench to pull the trigger to pop out the box head, which is the end of the work.
扭剪扳手的特點： 操作方便、省時省力、安全方便。
Features of the shear wrench: easy to operate, time-saving and labor saving, safe and convenient.
優勢
advantage
一、操作方便。
1、 Easy to operate.
二、省時省力。
2、 Save time and effort.
三、價格高。
3、 The price is high.
The above is a detailed introduction to the electric wrench for torsional shear, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional service http://www.lvhe888.com
