專用套筒分為內套筒、外套筒，施工時，內套筒抓住螺栓桿梅花頭，外套筒緊固螺栓螺帽，反向緊固。到達非常大扭矩后，內套筒把梅花頭扭斷，這時抽出套筒，扣動扳機彈出梅花頭。

Special sleeves are divided into inner sleeves and outer sleeves. During construction, the inner sleeve grabs the plum blossom head of the bolt rod, and the outer sleeve tightens the bolt and nut in the opposite direction. After reaching the maximum torque, the inner sleeve twists and breaks the plum blossom head. At this time, the sleeve is pulled out and the trigger is pulled to pop out the plum blossom head.

扭剪型電動扳手在工作之前，要把套筒頭對準螺栓梅花頭合理地插進，插到底部后再開始工作。

Before starting work, the torque type electric wrench should align the socket head with the bolt head and insert it in a reasonable manner. After inserting it to the bottom, it can start working.

一般地：當緊固螺栓到相當次數時，內套筒會因磨損而造成彈不出梅花頭，這時更換套筒即可重新使用。

Generally, when the bolts are tightened a considerable number of times, the inner sleeve will wear and tear, causing it to not bounce out of the plum blossom head. At this time, the sleeve can be replaced and reused.

若在施工過程中，當梅花頭彈不出時，可能的原因有以下幾種：

If during the construction process, the plum blossom head cannot bounce out, there are several possible reasons:

①螺栓材質有問題。當螺栓發軟時，會造成梅花頭彈不出來。

① There is an issue with the bolt material. When the bolt becomes soft, it will cause the plum blossom head to not pop out.

②施工不正確。若插入螺栓時不順利或者有傾斜角度，就可能造成梅花頭彈不出來。

② Incorrect construction. If the bolt insertion is not smooth or there is an inclination angle, it may cause the plum blossom head to not pop out.

③套筒出現問題。請檢查套筒是否已經磨損過度，或其他情況，也會造成梅花頭彈不出來。

③ There is a problem with the sleeve. Please check if the sleeve has worn excessively or if there are other conditions that may cause the plum blossom head to not pop out.

本文由扭剪電動扳手友情奉獻.更多有關的知識請點擊:http://www.lvhe888.com真誠的態度.為您提供為多維度的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is a friendly contribution from the torsion shear electric wrench. For more related knowledge, please click: http://www.lvhe888.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned